HOW TO CONFIGURE THE GIGASET C530 IP VOIP CONNECTIONS

Discuss about the phone number list
Post Reply
aliciarabin4
Posts: 1
Joined: Sat Oct 29, 2022 3:09 am

HOW TO CONFIGURE THE GIGASET C530 IP VOIP CONNECTIONS

Post by aliciarabin4 »

In order for the LAN to “recognize” your phone, an IP address is required. The IP address can be assigned to the phone manually or automatically (from the router). If dynamic assignment is chosen, the router’s DHCP server automatically assigns an IP address to the phone. The IP address may change depending on the router’s configuration. If manual/static assignment is chosen, you will be the one to assign the phone a fixed IP address. This may be necessary depending on the structure of your network (e.g., if you connect the phone directly to a PC). Note.

To perform dynamic IP address assignment, the DHCP server must be enabled on the router. Please refer to the router’s instructions for use. In case the system PIN is not 0000: enter the Phone Number List system PIN arrow OK IP address type: arrow key-address-right-izq Static/Dynamic With Dynamic IP Address Type:. The following fields show the current configuration that the phone has obtained from the router. This configuration cannot be modified. With Static IP Address Type:. In the following fields you must manually set the IP address and subnet mask of the phone as well as the subnet mask of the phone, as well as the standard gateway and DNS server. IP Address: ¤ Enter the IP address (overwrite the current settings).

Image

The default is Subnet Mask: arrow Enter the subnet mask (overwrite the current setting). The default is 255.255.255.255.0. Serving as the default. DNS Server: arrow Enter the IP address of the preferred DNS server. When the connection is established, the DNS (Domain Name System) server converts the symbolic name to the IP address of the preferred DNS server. server (DNS names) into the public IP address of the server. public IP address of the server. You can enter the IP address of your router here. The router forwards address queries from the phone to the DNS TO CONFIGURE THE GIGASET C530 IP VOIP CONNECTIONS? Note. If VoIP data is loaded via the automatic configuration on your phone, the VoIP wizard will not be available.
Post Reply